What you can expect from us
✔ Insulation of enclosures and walls
Highly effective absorbers to reduce interior noise levels
✔ Anti-booming solutions for sheet metal housings
Viscoelastic insulation layers for vibration damping
✔ Compressor jackets (Cello® SB)
Reduction of noise levels by up to 6 dB
✔ Vibration insulation
For decoupling vibrating components and hence minimize structure-borne noise
✔ Air duct linings
Absorption and attenuation of flow noises
✔ Pipe insulation products
Thermal and acoustic insulation in one – ideal for pipes in heating and cooling systems
✔ Seals and gaskets
Products that keep joints between materials airtight and prevent noise transmission
Clever noise-control solutions for heat pumps from Cellofoam
Heat pumps have become a must in modern buildings – they are efficient, eco-friendly and future-proof. However, their operation involves various sources of noise which, without suitable measures, can lead to annoyingly high noise levels. This can be a problem, especially in residential areas or in densely built-up zones.
As legal requirements on noise emissions become stricter and consumer awareness of home comfort increases, it is becoming more and more important to “quiet down” new and existing heat pumps. Today, a low noise level is a key criterion when purchasing modern heating systems.
As a manufacturer, you can work with Cellofoam to ensure that your heat pumps are among the most silent on the market. Integrating our customized sound insulation solutions will set you apart from the competition and make your products even more attractive. Cellofoam offers the right acoustic solutions for all relevant noise sources in heat pumps – from sound absorption to vibration decoupling.
We are a member of the German heat pump association
As a member of bwp - Bundesverband Wärmepumpe e.V., Cellofoam is actively involved in the development and further improvement of quiet and efficient heat pump technology.
The challenge: Sound levels inside the heat pump housing
Inside the heat pump housing, the sound energy is reflected by hard surfaces such as side and roof panels. Without acoustic measures, the sound intensity can increase dramatically due to repeated reflection of the sound waves – resulting in high sound pressure levels that are transmitted through the housing to the outside.
Acoustic excitation makes sheet metal or plastic housing panels and fan blades vibrate strongly. These vibrations – caused by the compressor or the air flow – propagate in the form of bending or compression waves. The result: Structure-borne sound that is transmitted to the surroundings as airborne sound.
The solution: Cellofoam noise-control products
Our materials are designed specifically to reduce these undesirable effects – for a smooth and quiet operation of your heat pump.
With over 60 years of experience and a wide product portfolio, Cellofoam delivers effective solutions tailored to your application – from expert advice by our acoustics specialists to customized product manufacturing, holistic solutions and clever accessories.
Thanks to state-of-the-art acoustic camera technology, we can also offer you exact sound analyses directly on site. The camera makes it possible to visualize noise sources, precisely locate problematic areas and plan optimal sound insulation and attenuation measures.
Contact us now for more information and advice – we help you reduce the noise level of your heat pump for the long term.
Typical uses
Add-ons
Typical products for this application:
CELLO® F800 FR
White polyester non-woven with high shape stability.
Cello® F800 FR scores with excellent fire performance, as proven in a variety of flammability tests, and very good temperature resistance ...to the product »
CELLO® 453
PUR foam combined with a visually attractive and sound-absorbing non-woven.
Cello® 453 scores with an oil- and water-repellent and mechanically highly robust surface layer ...to the product »
CELLO® R 615
Top-quality recycling product made mainly from PUR foam, with air-permeable surface.
Our composite foam Cello® R 615 scores with excellent sound attenuation and insulation values and high mechanical stability
...to the product »
CELLO® HR 290 HO/O
Oil- and water-repellent soft foam made from melamine resin (made from Basotect®).
Cello® HR 290 HO/O offers excellent heat resistance characteristics and is resistant against splash water ...to the product »
CELLO® PIPE HO 91-02
Pipe insulation product made from oil- and water-repellent polyester non-woven, laminated with black polyester film.
Cello® PIPE 800 HO 91-02 scores with its high overall durability and a very robust, yet highly elastic film surface ...to the product »
Housing
Typical products for this application:
CELLO® BBA
Broad-band noise absorber combining a base panel with a top panel that is both noise-absorbing and decorative.
Cello® BBA is the ideal solution for dampening large-bandwidth noise with varying proportions of low, medium and/or high frequencies ...to the product »
CELLO® D 2600
Closed-cell PE foam that offers both sound-insulation and sound-absorption effectiveness.
Cello® D 2600 scores with its high mechanical and chemical stability and good resistance against humidity, freezing temperatures and dirt ...to the product »
CELLO® D 2500
Dark-gray PE foam.
Cello® D 2500 scores with very good chemical resistance against carbon hydrides and alcohols as well as the fact that its water absorption is below 1 Vol. %
...to the product »
CELLO® 471
PUR foam with a sealed, but air-permeable surface.
Cello® 471 scores with the visually attractive lozenges pattern of its robust and dirt-resistant surface ...to the product »
CELLO® 521
PUR foam with a sealed, but air-permeable rippled surface.
Cello® 521 scores with a distinctive surface design and excellent absorption performance over the entire frequency range ...to the product »
CELLO® HR 290 ALG
Light gray, soft foam made from melamine resin (made from Basotect®) ands laminated with an aluminum surface layer.
Cello® HR 290 ALG scores with excellent fire performance values and a surface that is impermeable to oil, water and fuels ...to the product »
CELLO® R 615
Top-quality recycling product made mainly from PUR foam, with air-permeable surface.
Our composite foam Cello® R 615 scores with excellent sound attenuation and insulation values and high mechanical stability
...to the product »
CELLO® EVA
Flexible heavy foil made from a blend of synthetic materials with an admixture of special flame-retardant minerals.
Cello® EVA scores with excellent noise insulation effectiveness and very good fire performance ...to the product »
CELLO® SBF
Film-laminated bitumen heavy foil used for sound insulation and attenuation of sheet metal and metal parts.
Cello® SBF scores with excellent sound attenuation effectiveness and high temperature resistance ...to the product »
CELLO® Gaskets
Made from PVC, EPDM, PUR, PE, NBR or SILICONE our Cello® Gaskets ensure reliable sealing against the ingress of air, dust and liquids in a wide range of applications – for instance in machine construction or ...more »
Feet
Typical products for this application:
Vibration-damping materials
Cello® vibration-damping materials are made from high-quality PUR foams of mixed cell structure and various densities. They are used for vibration damping and solid-borne noise insulation ...more »
Feet
Typical products for this application:
Vibration-damping materials
Cello® vibration-damping materials are made from high-quality PUR foams of mixed cell structure and various densities. They are used for vibration damping and solid-borne noise insulation ...more »
Compressor
Typical products for this application:
Compressor jacket
Compressors, for instance used as part of heat pumps or other systems, are a typical source of annoying noise.
Our new, specially designed Cello® SB compressor jacket can substantially reduce the resulting noise emissions ...more »
Vibration-damping materials
Cello® vibration-damping materials are made from high-quality PUR foams of mixed cell structure and various densities. They are used for vibration damping and solid-borne noise insulation ...more »
CELLO® F800 FR ALG-01
White polyester non-woven laminated with an aluminum foil.
Cello® F800 FR ALG-01 scores with excellent fire performance, as proven in a variety of flammability tests, and a surface that is impermeable to oil, water and fuels
...to the product »
Materials filter function – quickly find the right product
We have programmed a materials filter function that will help you find the right product quickly and easily among our wide range of soundproofing and insulation products available.
By clicking on the material type, you can narrow down the variety of products proposed and receive a target-specific selection of items that exactly match your requirements.
Produkte für Wärmepumpen
Peace and quiet at home – sound insulation for heat pumps
Home is the place where you want to feel comfortable at all times. This includes cozy indoor temperatures in winter and a restful atmosphere without annoying noises from the heating system.
With our effective sound and vibration insulation materials, heat pumps can be equipped in such a way that they become (almost) inaudible: System operation turns pleasantly quiet and ceases to be an annoying or disruptive factor. Such acoustic measures allow in most cases to install the heat pump in the boiler room or outdoors without building additional structures.
Thanks to our carefully chosen material combinations, both sound-insulating and sound-absorbing properties can be achieved in one product. Contact us to find out more.
For more information please refer to our product leaflet.
Environmental friendliness and sustainability
For us at Cellofoam it is very important to provide environment-conscious and sustainable sound insulation solutions. Our materials are:
- Recyclable → Developed to minimize environmental impact.
- Durable → Their long service life saves resources.
By using sustainable materials, we help protect the environment and support a greener and more sustainable future. Turn to Cellofoam to minimize annoying noise levels and your ecological footprint at the same time.
About Cellofoam - your expert for sound insulation for heat pumps
Cellofoam has been a leading specialist in acoustic and thermal insulation solutions for over 60 years. Based on flexible foams and non-wovens, we develop and manufacture ready-to-install products that are suitable for use in a wide variety of industrial and technical applications.
Our innovative processes, such as the Cello® process for foam finishing, guarantee high-quality absorber foams and acoustically optimized combination products.
A particularly clever and useful solution is our efficient sound insulation for heat pumps, which ensures low-noise operation and thus helps keep homes and gardens a quiet oasis of peace. With a strong focus on sustainability and quality, we are making the world a quieter and more restful place.