We make wind turbines work more quietly

We make cogeneration units work more quietly

We make HVAC systems quieter

We make heat pumps and cogeneration units quieter

We make ventilation systems quieter

Heating / ventilation / air conditioning / heat pump

Noise insulation materials for heating, ventilation and air conditioning systems

From heat pumps to ventilation equipment to air-conditioning systems – noise control products from Cellofoam make their presence felt everywhere by reducing noise and vibration to an (almost) unnoticeable level Systems run in discreet silence, and are no longer perceived as a source of distraction or disruption in the workplace, hotel or apartment. As an additional benefit, their low heat conductivity makes our materials also good thermal insulators.

For more information please refer to our brochure.

 

Typical uses

Selection of material

Please select the desired material:
product(s) found matching your selection
Deselect

Products for heating / ventilation / air conditioning / heat pumps

Cello 453

PUR foam combined with a visually attractive and sound-absorbing non-woven. Cello® 453 scores with...

Cello F800 FR ALG-01

White polyester non-woven laminated with an aluminum foil. Cello® F800 FR ALG-01 scores with...

Cello F700 FR HO ALG-01

White, oil- and water-repellent polyester non-woven laminated with an aluminum surface layer. Cello®...

Cello F700 FR HO

White, oil- and water-repellent polyester non-woven. Cello® F700 FR HO offers excellent sound...

Cello D 2600

Closed-cell PE foam that offers both sound-insulation and sound-absorption effectiveness. Cello® D...

Cello 491

PUR foam sealed with a thin black film. Cello® 491 scores with an oil-, water- and fuel-repellent...

Cello 471

PUR foam with a sealed, but air-permeable surface. Cello® 471 scores with the visually attractive...

Cello HR 290/O

Light gray, soft foam made from melamine resin (made from Basotect ®). Cello® HR 290/O scores with...

Cello 470

PUR foam with a sealed, but air-permeable surface. Cello® 470 scores with a visually attractive,...

Cello SBF

Film-laminated bitumen heavy foil used for sound insulation and attenuation of sheet metal and metal...

Cello EVA

Flexible heavy foil made from a blend of synthetic materials with an admixture of special...

Cello HR 290 ALG

Light gray, soft foam made from melamine resin (made from Basotect ®) ands laminated with an...

Cello HR 290 ALG-04

Soft foam made from melamine resin (made from Basotect ®) and laminated with an aluminum surface...

Cello 460

PUR foam with a sealed, but air-permeable surface. Cello® 460 scores with a water-repellent,...

Cello HR 290/71

Light gray, soft foam made from melamine resin (made from Basotect ®) with a slightly densified, but...

Cello 471Ä

PUR-ether foam with a sealed, but air-permeable surface. Cello® 471Ä scores with the visually...

Cello D 2500

Dark-gray PE foam. Cello® D 2500 scores with very good chemical resistance against carbon...

Cello 451

PUR foam combined with a visually attractive and noise-absorbing non-woven. Cello® 451 scores with...

Cello BBA

Broad-band noise absorber combining a base panel with a top panel that is both noise-absorbing and...

Cello HR 290 HO/O

Oil- and water-repellent soft foam made from melamine resin (made from Basotect ®). Cello® HR 290...

Cello HR 290 HO ALG-04

Oil- and water-repellent soft foam made from grey melamine resin (made from Basotect ®). For...

Cello PIPE 800 HO 91-02

Pipe insulation product made from oil- and water-repellent polyester non-woven, laminated with black...

Cello PIPE 800 HO ALG-04

Pipe insulation made from oil- and water-repellent polyester non-woven, laminated with aluminum...

Cello PIPE 800 HO 95

Pipe insulation product made from oil- and water-repellent polyester non-woven, laminated with...

Cello Adhesive tapes

Cello® adhesive tapes are used for sealing edges and joints and for covering tears or worn areas....

Regufoam

Our vibration-damping materials are made from high-quality pur foams of mixed cell structure and...